Saturday, March 17, 2007
Another way to Unlock v360, without Testpoint
Well.. I present you another way to Unlock v360 without testpoint..
This tutorial is based on the step-by-step made by to Lord_Dizzy. I cleared the method so everybody can understand it a bit better and can do it in 5 minutes.. no more..
Credits to: Lord_Dizzy for the method and Yuet for his MP that allows this..
What we need:
- Have already installed yuet's MonsterPack v2.1 (according to your BootLoader)
- P2k Easy Tool v3.9 cracked
- RSD Lite 2.7
- Flash Backup 3
- Unlock Flash called "R4513_G_08.B7.DAR_RB_Lang0031_Unlock.shx" (for BL08.A0/08.D0)
UPDATE 03/29/07: Here it's the unlock_flash for BL 08.A2
UPDATE 03/15/07: If you can't find these programs or feel lazy to do it. Here you go:
- Programs to Unlock v360
Steps:
1. Open p2k ET, connect phone in flash mode and select phone model and click on 'Flash SHX' checkbox.. You're gonna flash your phone with the unlock_flash_file (mentioned before) by selecting the file and then clicking on 'Do Selected Jobs'.
After it's done, it wont power on (DONT WORRY). Now Disconnect USB cable from Phone and take battery out. (This first step will put your phone in blank neptune)
2. Close p2k ET and Open RSD Lite. Connect the phone (with or without battery) to USB cable (It will be detected as 'S Blank Neptune LT2'). You will see it as connected in RSD Lite and YOU have to CLICK ON IT so the program can get a pop up message with the error 00x27 or something like that. (DONT WORRY, that means it's going well). Disconnect now USB cable from the phone.
3. Close RSD Lite and Open P2K ET. Connect USB cable to the phone. Go to 'Repair' tab, select phone model and click on the 'Full repair PDS zone' checkbox. Now click on 'Do Select Jobs' (It's going fine). Disconnect USB cable from the phone.
4. REPEAT STEP 2 (the same thing so the phone can be detected and RSD Lite can make the same error)
5. Close RSD lite and Open P2K ET. Connect USB cable to the Phone. Go to 'Locks' tab, select the phone model and click on the 'Unlock SP' checkbox. now click on 'Do Select Jobs' (So far we're doing great). Disconnect USB cable from the phone.
6. REPEAT STEP 2 (We need to get once again the error by RSD Lite)
7. Close RSD Lite and Open P2K ET. Connect USB cable to the phone. Go to 'Repair' tab, select phone model and click on the 'Full repair PDS zone' checkbox. Now click on 'Do Select Jobs' (We're almost done). Disconnect USB cable from the phone.
8. Close P2K ET and open Flash Backup. Put the battery back into the phone and Connect to USB cable (DO NOT TURN IT ON YET). Go to 'Write Data' tab and select Yuet's MP. Now DESELECT checkbox on CG1, CG2 and CG15 and click on "WRITE DATA" and THAT's IT!!!
This takes no more than 5 minutes and it's being tested in Bootloaders 08.D0 and 08.A0.. So if you have any other BL. I suggest you to try it to see if it works..
Enjoy it.. Cheers
This tutorial is based on the step-by-step made by to Lord_Dizzy. I cleared the method so everybody can understand it a bit better and can do it in 5 minutes.. no more..
Credits to: Lord_Dizzy for the method and Yuet for his MP that allows this..
What we need:
- Have already installed yuet's MonsterPack v2.1 (according to your BootLoader)
- P2k Easy Tool v3.9 cracked
- RSD Lite 2.7
- Flash Backup 3
- Unlock Flash called "R4513_G_08.B7.DAR_RB_Lang0031_Unlock.shx" (for BL08.A0/08.D0)
UPDATE 03/29/07: Here it's the unlock_flash for BL 08.A2
UPDATE 03/15/07: If you can't find these programs or feel lazy to do it. Here you go:
- Programs to Unlock v360
Steps:
1. Open p2k ET, connect phone in flash mode and select phone model and click on 'Flash SHX' checkbox.. You're gonna flash your phone with the unlock_flash_file (mentioned before) by selecting the file and then clicking on 'Do Selected Jobs'.
After it's done, it wont power on (DONT WORRY). Now Disconnect USB cable from Phone and take battery out. (This first step will put your phone in blank neptune)
2. Close p2k ET and Open RSD Lite. Connect the phone (with or without battery) to USB cable (It will be detected as 'S Blank Neptune LT2'). You will see it as connected in RSD Lite and YOU have to CLICK ON IT so the program can get a pop up message with the error 00x27 or something like that. (DONT WORRY, that means it's going well). Disconnect now USB cable from the phone.
3. Close RSD Lite and Open P2K ET. Connect USB cable to the phone. Go to 'Repair' tab, select phone model and click on the 'Full repair PDS zone' checkbox. Now click on 'Do Select Jobs' (It's going fine). Disconnect USB cable from the phone.
4. REPEAT STEP 2 (the same thing so the phone can be detected and RSD Lite can make the same error)
5. Close RSD lite and Open P2K ET. Connect USB cable to the Phone. Go to 'Locks' tab, select the phone model and click on the 'Unlock SP' checkbox. now click on 'Do Select Jobs' (So far we're doing great). Disconnect USB cable from the phone.
6. REPEAT STEP 2 (We need to get once again the error by RSD Lite)
7. Close RSD Lite and Open P2K ET. Connect USB cable to the phone. Go to 'Repair' tab, select phone model and click on the 'Full repair PDS zone' checkbox. Now click on 'Do Select Jobs' (We're almost done). Disconnect USB cable from the phone.
8. Close P2K ET and open Flash Backup. Put the battery back into the phone and Connect to USB cable (DO NOT TURN IT ON YET). Go to 'Write Data' tab and select Yuet's MP. Now DESELECT checkbox on CG1, CG2 and CG15 and click on "WRITE DATA" and THAT's IT!!!
This takes no more than 5 minutes and it's being tested in Bootloaders 08.D0 and 08.A0.. So if you have any other BL. I suggest you to try it to see if it works..
Enjoy it.. Cheers
Labels: unlock v360
# posted by Sarah's Angel @ 12:33 PM 
Comments:
<< Home
Hi, thanks for Your information.
Before to start to unlock my V360 I download the SW and I try to do a preliminary backup using Flash&Backup 3.0.053
The backup don't finish and the message on PC Flash&Backup is:
*********************
*** Operation start (28/03/2007 17.53.33) ***
Random's Flash&Backup 3.0.053
Read data: E:\Documents and Settings\admin\My Documents\2007-03-28_175333\...
Turning phone to Flash-mode...
Sending loader...
***********************
On the phone I read:
Boot Loader
08.A0
SW Version:
R4513_G-08.B7.
AER
OK to Program
Connect USB
Data Cable
****************
is that OK ?
this means that I cannot do a preliminarYy bakup before starting the unlock procedure ?
Thanks and bye for now
Write
Before to start to unlock my V360 I download the SW and I try to do a preliminary backup using Flash&Backup 3.0.053
The backup don't finish and the message on PC Flash&Backup is:
*********************
*** Operation start (28/03/2007 17.53.33) ***
Random's Flash&Backup 3.0.053
Read data: E:\Documents and Settings\admin\My Documents\2007-03-28_175333\...
Turning phone to Flash-mode...
Sending loader...
***********************
On the phone I read:
Boot Loader
08.A0
SW Version:
R4513_G-08.B7.
AER
OK to Program
Connect USB
Data Cable
****************
is that OK ?
this means that I cannot do a preliminarYy bakup before starting the unlock procedure ?
Thanks and bye for now
Write
I have a 09.02 bootloader and I want to try this method... but I don't want to kill my phone.
Anyone try it?
Anyone try it?
Write:
you havent installed succefully your drivers in the phone doesnt have to say data cable, it has to say ok transfer or somethig like that.
Outime:
for BL 09.02 i tink that it wont work
because your BL inst compatible with the flash but if you want give a try 'n see. but i think that for now the only safe way to unlock it is by testpoint
you havent installed succefully your drivers in the phone doesnt have to say data cable, it has to say ok transfer or somethig like that.
Outime:
for BL 09.02 i tink that it wont work
because your BL inst compatible with the flash but if you want give a try 'n see. but i think that for now the only safe way to unlock it is by testpoint
I'll try to answer all question in order.. (next time, please leave your name)
1. Make sure you have registered FB3 .. and make sure you have selected the right profile for your phone.. The AER firmware is what they call 'sticky firmware' since it wont let you do many things... anyways.. try it again and make sure you have the right loader selected .. in this case for 08.A0
2. This method will NOT work for BL 09.02 since it has a newer firmware.. and the flash_unlock can't make the error to put it in blank neptune.. sorry.. hope they will come up with some idea..
3. yeah.. you're right.. so far i know the only way to unlock BL09.02 is with TP .. .not even the guys from got_moto can unlock that BL..
Hope everything is clear.. See ya later :)
Cheers
1. Make sure you have registered FB3 .. and make sure you have selected the right profile for your phone.. The AER firmware is what they call 'sticky firmware' since it wont let you do many things... anyways.. try it again and make sure you have the right loader selected .. in this case for 08.A0
2. This method will NOT work for BL 09.02 since it has a newer firmware.. and the flash_unlock can't make the error to put it in blank neptune.. sorry.. hope they will come up with some idea..
3. yeah.. you're right.. so far i know the only way to unlock BL09.02 is with TP .. .not even the guys from got_moto can unlock that BL..
Hope everything is clear.. See ya later :)
Cheers
Hi,
My V360 has boot loader V 08.A2 and P2k ET raise an error with FLASHCMD and JUMP in the first step.
There is any new version of P2K ET that may work with this BL?
I got V3.9 and V4.1 and both didn't woked...
And if I try to flash using RSD Lite?
hugs
My V360 has boot loader V 08.A2 and P2k ET raise an error with FLASHCMD and JUMP in the first step.
There is any new version of P2K ET that may work with this BL?
I got V3.9 and V4.1 and both didn't woked...
And if I try to flash using RSD Lite?
hugs
mmhh.. well.. try by changing the phone model to v360V in the p2k ET 3.9 .. sometimes that work (especially in phones from brasil)..
also, the version 4.1 always give error when trying to repair PDS..
make sure also to have the right version of RSD Lite.. its gotta be 2.7 or higher.. otherwise you wont get the error mentioned to change the BL to 0300..
oh.. and sometimes the F&B3 wont recognize the loader for the v360 with that BL, eventhough the BL changes to BL08.A0 after doing the repair PDS..
good luck
also, the version 4.1 always give error when trying to repair PDS..
make sure also to have the right version of RSD Lite.. its gotta be 2.7 or higher.. otherwise you wont get the error mentioned to change the BL to 0300..
oh.. and sometimes the F&B3 wont recognize the loader for the v360 with that BL, eventhough the BL changes to BL08.A0 after doing the repair PDS..
good luck
08.D0 R4513-G-08.B7 AER (sticky)
on Orange France network
Hello and congratulation for your job.
I 'm newbie on phone flashage and try to inprove. I've try with unsuccess different ways from Yuet & Sarah Angel to unstick and unsimlock my V360. I've got many the problems by mobile revived allways for the moment (most critical were no power on and no flash mode avalaible).I always flash back wih my original backup to revive it.
The big difference is that I flash the strighly 'S Blank Neptune LT2'on my original firmare' because
I if flash "YuetMonsterPack v2.1" mobile can't power on, but may be it'normal, and i must go on? may be i've problem wih the language? Do u known if thes were case of success in such a case?
Thant's in advance
Post a Comment
on Orange France network
Hello and congratulation for your job.
I 'm newbie on phone flashage and try to inprove. I've try with unsuccess different ways from Yuet & Sarah Angel to unstick and unsimlock my V360. I've got many the problems by mobile revived allways for the moment (most critical were no power on and no flash mode avalaible).I always flash back wih my original backup to revive it.
The big difference is that I flash the strighly 'S Blank Neptune LT2'on my original firmare' because
I if flash "YuetMonsterPack v2.1" mobile can't power on, but may be it'normal, and i must go on? may be i've problem wih the language? Do u known if thes were case of success in such a case?
Thant's in advance
<< Home
