Wednesday, February 28, 2007
How to Unlock V360 without TP ...
This tutorial can be found in spanish at www.forov360.com .. I decided to translate since it's been tested and seems to work with all bootloaders.. which is hard and a pain in the axx..
All credits are for Arkangel (Cristian Hinz), r3drum (Brian N Haslop) and Luks from the same site..
ok.. so here he go..
First, you will need some flex files, You must use the most appropriate for your v360 BootLoader (BL).. (you can check this by turning off the phone and then press *,# and POWER at the same time).. Here they are:
-For BL 08.A0: (BOOT 08.A0)
-For BL 08.D0: (BOOT 08.D0)
UPDATE March 09, 07: great news, Yuet came up with a new flash for both BoolLoaders. Here it is:
- BL 08.A0 and 08.D0 (which apparently can work also with BL 09.02)
UPDATE March 10, 07: You can also check this other method posted by Yuet in his blog, which gives you a different way to get your phone in 'blank neptune' easier.. Check it ou here:
Get v360 unlocked without TP
Second you need some software: (google the names and you'll find them)
- "P2K Easy Tools v3.9 cracked" (gotta be this version- that's how it works)
- RSD Lite (Any version)
- It's valid to mention also you need the drivers for the phone (v2.9 if i remember) and also your USB cable of course!
NOTE: Always and i mean it, you should ALWAYS make a backup of your phone. This in case you need to repair your PDS.. you can use FlashBack 3 to do this.
Third: Let's rock..
1- Open the RSD Lite
2- Turn on your phone in flash mode (press *, #, POWER)
3- Connect the phone to PC through USB cable
4- Open the flex file (according to your v360 BL) with the RSD Lite and 'Start' it.
5- Wait till the process is finished (checksum ok) and then the phone will try to start but it won't turn on (Don't freak out). Unplug the usb cable from the phone.
6- take the battery out for 15 seconds
7- Connect the usb cable to the phone, WITHOUT BATTERY and it will say 'Unknown device'
8- Disconnect USB cable
9- Put battery back in the phone
10- Open 'Device Manager' in your PC (right click in 'My Computer' and click in Manage) and connect the usb cable to the phone. It will recognize it as "Flash Interface"
11- The RSD Lite will show the phone as "SK Neptune Blank LT2" (if Not Detected, switch USB port and repeat steps 6,7,10) (Tip:It's better if you keep the Device Manager Open all the time)(Note: with the last update, you shouldnt have problems to detect the phone)
12- Close the RSD Lite
13- Open the P2k Easy Tool 3.9, select the phone model, go to LOCKS tab and check Unlock SP. Then click on 'Do Selected jobs' (Tip:You can also repair the PDS here or get rid of some sticky firmware)
14- Wait till process is done, it will pop out a message about disconnecting the TP, Just click "OK" and then you will get "Unlock Ok" message (your phone is now unlocked) but we're not DONE yet.. and DON'T try to turn the phone on YET.
15- Close the P2K Easy Tool and take the battery out for 10 seconds
16- Now, pressing *,#,POWER keys at the same time (DO NOT release them) you will put the battery back in at the same time and the phone will start in "Flash Mode"
17- Open the RSD Lite and put any MonsterPack (MP) you like ( like Yuet, Diabolic or Krato), wait till finishes and restarts .... there you go.. you have now a v360 unlocked...
PS. Sometimes you might try to connect the phone to your pc several times so it can recognize it (always without the battery), but there's not such a thing like killing the phone by flashing it.. you can get always your phone in 'Flash Mode' by presing *,#,POWER keys and holding them till you put the battery back in..
Enjoy it.. and Sorry for those GOT_MOTO guys..
Cheers
All credits are for Arkangel (Cristian Hinz), r3drum (Brian N Haslop) and Luks from the same site..
ok.. so here he go..
First, you will need some flex files, You must use the most appropriate for your v360 BootLoader (BL).. (you can check this by turning off the phone and then press *,# and POWER at the same time).. Here they are:
-For BL 08.A0: (BOOT 08.A0)
-For BL 08.D0: (BOOT 08.D0)
UPDATE March 09, 07: great news, Yuet came up with a new flash for both BoolLoaders. Here it is:
- BL 08.A0 and 08.D0 (which apparently can work also with BL 09.02)
UPDATE March 10, 07: You can also check this other method posted by Yuet in his blog, which gives you a different way to get your phone in 'blank neptune' easier.. Check it ou here:
Get v360 unlocked without TP
Second you need some software: (google the names and you'll find them)
- "P2K Easy Tools v3.9 cracked" (gotta be this version- that's how it works)
- RSD Lite (Any version)
- It's valid to mention also you need the drivers for the phone (v2.9 if i remember) and also your USB cable of course!
NOTE: Always and i mean it, you should ALWAYS make a backup of your phone. This in case you need to repair your PDS.. you can use FlashBack 3 to do this.
Third: Let's rock..
1- Open the RSD Lite
2- Turn on your phone in flash mode (press *, #, POWER)
3- Connect the phone to PC through USB cable
4- Open the flex file (according to your v360 BL) with the RSD Lite and 'Start' it.
5- Wait till the process is finished (checksum ok) and then the phone will try to start but it won't turn on (Don't freak out). Unplug the usb cable from the phone.
6- take the battery out for 15 seconds
7- Connect the usb cable to the phone, WITHOUT BATTERY and it will say 'Unknown device'
8- Disconnect USB cable
9- Put battery back in the phone
10- Open 'Device Manager' in your PC (right click in 'My Computer' and click in Manage) and connect the usb cable to the phone. It will recognize it as "Flash Interface"
11- The RSD Lite will show the phone as "SK Neptune Blank LT2" (if Not Detected, switch USB port and repeat steps 6,7,10) (Tip:It's better if you keep the Device Manager Open all the time)(Note: with the last update, you shouldnt have problems to detect the phone)
12- Close the RSD Lite
13- Open the P2k Easy Tool 3.9, select the phone model, go to LOCKS tab and check Unlock SP. Then click on 'Do Selected jobs' (Tip:You can also repair the PDS here or get rid of some sticky firmware)
14- Wait till process is done, it will pop out a message about disconnecting the TP, Just click "OK" and then you will get "Unlock Ok" message (your phone is now unlocked) but we're not DONE yet.. and DON'T try to turn the phone on YET.
15- Close the P2K Easy Tool and take the battery out for 10 seconds
16- Now, pressing *,#,POWER keys at the same time (DO NOT release them) you will put the battery back in at the same time and the phone will start in "Flash Mode"
17- Open the RSD Lite and put any MonsterPack (MP) you like ( like Yuet, Diabolic or Krato), wait till finishes and restarts .... there you go.. you have now a v360 unlocked...
PS. Sometimes you might try to connect the phone to your pc several times so it can recognize it (always without the battery), but there's not such a thing like killing the phone by flashing it.. you can get always your phone in 'Flash Mode' by presing *,#,POWER keys and holding them till you put the battery back in..
Enjoy it.. and Sorry for those GOT_MOTO guys..
Cheers
Labels: unlock v360
# posted by Sarah's Angel @ 9:07 AM 
Comments:
<< Home
tried the unlock without tp it seems to show it was working tp said lock removed i did the flash backup procedure clicking group 1 2 and 15 it said completed then the phone shut down and has not restarted since even trying the removing battery holding the hash star and power button i cant get a boot screen to load
tried seVeral times with A FULL charged battery if anyone knows another way to powerup the phone can you please tell me
email me at muzzaz40@bigpond.com
thanx
tried seVeral times with A FULL charged battery if anyone knows another way to powerup the phone can you please tell me
email me at muzzaz40@bigpond.com
thanx
Thank you for your mobile unlocking information, last week i unlocked my phone from the help of this site.http://www.wickedunlock.com/
Post a Comment
<< Home
